Home > Products > Fireproof cable > Copper Fire Resistant Cable
Synthetic mineral-insulated Metal sheath Copper Flexible Fire-proof power Cable

Synthetic mineral-insulated Metal sheath Copper Flexible Fire-proof power Cable

Description
无标题文档

HFTGB-- Synthetic mineral-insulated Metal sheath Copper Flexible Fire-proof power Cable can lay in indoors、duct、cable trench、cable tray and place that can bear the mechanical action of external forces.

1.Product standard

GB/T 12706.1-2008《Rated voltage1kv(Um=1.2kv)to 35kv(Um=40.5kv) Extruded insulation power cable First part》

2.Fire resistance test Standard

BS6387:1994《Performance requirement of keeping cable completeness under the fire conditions》

3.Basic technical requirements
 Place of installation: indoors、outdoors(according to type of cable and range of applications)
 Laying method and temperature: cable trench、cable tunnel、overhead bridge、cable interlayer; the environment temperature of installation is not lower than 0℃.
 Environment of laying: Cables can lay in surface, cable rack、cable hanger and other easy and cheap methods of laying.

4.Operating conditions of cables
 Operating temperature:-40℃-180℃,short circuit(the maximum duration is no more than 5 seconds), the highest temperature of copper conductor is not more than 950℃.
 The maximum duration is no more than 5 seconds
 Rated frequency:49-61Hz
 Operating environment of cables: environment temperature:-40℃-180℃
 Bending radius: Bending radius of cables is not less than 7times of outer diameter.

 

 

 

5.Product features

 Performance of fireproof
 Outer sheath of HFTGB cable is using non-magnetic metal material made of thread, both to maintain the original soft bend of the cable, but also increase the fire rating, it also ensures that the installation of anti-scratch and the damaged by rats of using at the same time, and also helps heat dissipation when using the cable. HFTGB cable is comparable to regular cable. The materials do not cause fires and cannot be burned or feeding the fire.
 HFTGB is a real sense of fire proof cable, these materials with over 1300℃high melting points, so HFTGB fire proof cable can also perform normal transmission functions even under 1000℃ of high temperature flame conditions.

    Proprietary technology- Synthetic mineral-insulated flexible materials
 Synthetic mineral-insulated flexible materials is used silicone rubber as the basis, adding MgO, AlO, vitrified powder etc..
 HFTGB--Synthetic mineral-insulated Metal sheath Copper Flexible Fire-proof power Cable enhances the electrical、mechanical and anti-corrosion properties;it can reduce the electrical fault caused by the need of a large number of splices in the installation, solving the problems of easy absorption impact the insulating property for BTTZ cable.

  Flexible
 The construction of HFTGB cable is similar to regular cable, but it’s flexible as same as the regulars, this is the real flexible. It can be continuously wound on the cable tray in production and smoothly lined in installation.
 The conductor of the cable adopts the mature strand compression technigue, improving the flexibility on the basis of ensuring the smooth and round of conductor.
 The insulation adopt synthetic mineral flexible materials, the flexibility is the same as the regular cable.
 The outer jacket adopt non-magnetic stainless steel material made of thread, and ensuring the bending of the cable.


     Outer diameter
     D(mm)

Specified bending radius of power cable in GB/T12706

 

HFTGB cable

≤20

15D

12D

7D

≤30

15D

12D

7D

≤40

15D

12D

7D

≤50

15D

12D

7D

≤60

15D

12D

7D

≤70

15D

12D

7D

 

Cable without connector
 HFTGB cable can be delivered by customer’s requirements of length and cores, no matter single core or multi core, the length can meet the requirements of power supply.
 Compared with BTTZ of production length

 

Size

 

HFTGB(m)

 

BTTZ(m)

 

Size

 

HFTGB(m)

 

BTTZ(m)

1*10

Over 2000

480

3*4

Over1000

235

1*95

Over1500

145

3*10

Over1500

130

1*240

Over1500

56

3*25

Over1500

85

2*4

Over1500

250

4*4

Over1500

190

2*10

Over1500

150

4*10

Over1500

115

2*25

Over1500

90

4*25

Over1500

98

 
 Environment friendly
 HFTGB cable passed the test of National fireproof construction material supervision inspection center, the testing data shows that the performance exceed the requirements of low smoke zero halogen flame retardant(A) cable.
 Compared with standard of China’s ministry of public security:


     Item

Standard of GA306

 

 

VS

Data of burning test

PH

≥4.3

5.5

Electrical conductivity
     μ s/mm

 

≤10.0

 

0.7

Smoke density (minimum light transmittance)%

 

≥80

 

93

Greater capacity of currents carrying
 The currents carrying of HFTGB cable exceed regular cable a lot, and the stainless steel thread sheath is good for heat dissipation, it can transmit higher current.
 
Supper strong overloading-resistibility
 When the insulation layer of HFTGB fire proof cable meets high temperature, it will quickly form the shell protection. During the overload and short-circuit current causing conductor fusing without short circuit and fire. Even the copper liquid formed by a conductor's short circuit will not flow out, so the electrical accident and fire by overload will be eradicated.


Superior protection
 Outer sheath of HFTGB cable is using non-magnetic stainless steel material made of thread, it ensures that the installation of anti-scratch and the damaged by rats and termites, and also bears the continuously impact by the burning off and other heavy.

Installation
 The installation of HFTGB cable is the same as regular cable, without any connectors and special tools when bending and wiring. It can lay with hangers or brackets, don’t need expensive installation accessories and maintenance-free.


6. Installation instructions
 Segmentation and terminal of HFTGB mineral-insulated flexible cable
 According to the requirements(article 7)of length and Switch cabinets at both ends or electrical inlet-outlet line, locking respectively on both ends of disconnected position with a metal sheath terminal as shown in figure 3,and then cut the cable.
 Stripping the metal sheath unlocked in terminal of metal sheath,removing the sheath inside with the knife at the same time
 Ring-cutting the installation layer neatly with cutting tools,  and wrapping the white tapes outside the insulation with adhesive tape.
 Compacting the bi-metal lugs with crimping pliers,  ensuring reliable connection between conductor and lugs.
 According the article 2,grounding metal sheath of cable.
 Such as article 7,protecting the lugs with thermoplastic cable gloves
   Flexible mineral insulated cable can use heat shrinkable XLPE terminal lugs, detailed below: 

 The production methods of lugs meet the installation requirements of Housing and urban-rural development 《Civil building electrical design and construction of indoor wiring 08D800-6》.
 
 7. The grounding of metallic sheath and requirements of terminal technical
 The grounding wire of flexible mineral insulated cable’s metal sheath adopt that terminal of metal sheath and yellow green wire connect to termination; making the terminal of metal sheath locked on the metal sheath of cable after finishing the grounding.
 Figure 1: the yellow green line;(Tin-plated copper braided wire can be replaced)
 Figure 2: bolts and ground symbol
 Figure 3: metal sheathed terminal
 Figure 4: assembly structure
 Figure 5: a larger version 1 of assembly structure
 Figure 6: a larger version 2 of assembly structure
  


The above method of grounding meet the installation requirements of Housing and urban-rural development 《Civil building electrical design and construction of indoor wiring 08D800-6》.
 

Chat Now
Jennifer Kevin leo